Version	Rev Level	Version Notes
01Oct2012 	1.17 	

    Input configuration now saved during power cycle (BZ660).
    Add wideband option. Allows power factor measurements to more closely match the Model 931A.
    Fix to battery charger firmware.

24Jan2011 	1.15 	

    Updates to Real Time Clock (RTC) code - factory use only.
    Update UTC leap second offset default value (changed to -15 in 01Jan2009).
    Update check for minimum year value.
    Add support for new RTC chip.

24Nov2010 	1.14 	

    Power button delay adjusted. Power button requires a 0.25 second hold-down before initiating the shutdown.
    Add command to clear battery charger's EEPROM memory.
    Add notification to power charger module that power is being turned off.

22Sep2010 	1.13 	

    On/Off key needs some protection (Require key to be depressed for a short time period before doing shutdown). (BZ 615)
    Fix harmonics screen reset problem. (Only happens with very large voltage/current values)
    Update trigger setup screens to match PSCSV.
    Fix log time setup screen init problem. The "MaxLogTime" value will take on the "PostFault" value when first switched to the "PostFault" entry (enter or up/down arrow).

18Feb2010 	1.12 	

    Change tabular results, display 0, function key 4 from "PH ABC" to "PH ABCN". (BZ 559)
    Inconsistencies in user interface - Change references to "Sag Swell" to "Power Quality". (BZ 572)
    Rename "DUR", in Sag-Swell setup, to Dwell. (BZ 591)
    Auto log data loss (max log size seems to be around 1032 records - should be able to store upwards of 16,000 records). (BZ 594)
    View auto log - Fixed problem of paging up (using increment of more than 1) from the bottom of the log. (Depending on the increment size, the only record showing might be the one in the edit box). (BZ 595)
    Custom input screen allowed illegal settings. (BZ 601)

31Aug2009 	1.11 	

    Correct battery gas gauge calculation.
    Update battery threshold values (low warning and shutdown).

18Aug2009 	1.10 	

    Add support for new current module backend.

28Jul2009 	1.09 	

    Fix CT/PT setup screen: When reverting back to previous version, also needed to revert CT/PT bit-map indicator (side brackets).
    Fix lock-up problem associated with event inputs. (BZ 577)

17Jun2009 	1.08 	

    Update current ratio low limit check to take into account CT module type.
    CT/PT setup anomalies (restored old method). (BZ 568)

12Jan2009 	1.07 	

    Revised CT setup screen to include CT file data
    Saves CT setup screen in flash
    Visible satellite status screen would not update every 5 seconds. Successfully updates when changed to every second.
    Add support for new main board (Atmega48 battery charger and FTDI USB chip)
    Fix GPS DOP display overwrite problem

17Sep2007 	1.06 	

    Fix even-odd harmonics calculation
    Fix autolog to correctly reset min/max/avg when enabled.
    Add PST and Voltage-Current scheduled data to one-second log structure
    Add PST screen
    Fix input configuration screen to correctly save configuration using "Save settings" key.

03Aug2007 	1.05 	

    Speed up DSP Flash waveform download.
    Add ratio screen.
    Add Motorola M12M receiver capability.
    Fix redraw problem when switching between harmonics channels (bar graph).
    Save backlight and contrast settings when backlight On-Off-Auto function keys pressed.
    Correct Flicker readings (now they agree with 1133).

22Feb2007 	1.04 	

    Corrections to trigger logging system
    Require GPS 4 satellites for normal operation
    Fix relative phase
    Fix PMU phasor broadcast
    USB fixes
    Several status screen updates

20Dec2006 	1.03 	

    Correct neutral current on "Basic Data List" (was always showing 0's)
    Fix voltage/current average on tabular display screen
    Add voltage/current phase average to tabular display screen

11Dec2006 	1.01 	

    Reduce phasor display screen update rate.
    Add download capability of One-second log, DSP-I/O event log and Sag-Swell log.
    USB capability added.
    Fix references to trigger number (DSP and Sag-Swell triggers screens).
    Re-organized the configuration-status screen (move version information to its own screen).
    Now only showing the "main" host processor revision information.
    Add display for current module serial number.
    Update current module configuraiton data storage (make more robust).
    Fix power up problem with GPS not connected.