Model 1095A/C Firmware, Software and Utilities

Model 1095A/C Firmware

Version 24Feb2010

• This is the latest firmware available for the Model 1095A/C.
• Read the release notes below BEFORE downloading any firmware.

Firmware Uploader

• Version 0.0.8.0 released February 24, 2010.
• Required to upload the firmware to the Model 1095A/C.
• Compatible with Windows NT, 2000 and XP

Model 1095A/C Utility Application

Version 0.7.4.0 released August 19, 2009

• This software interface is for use only with Model 1095A/C.
• Allows user to configure the 1095A/C
• Supports reading the existing configuration from the 1095A/C to your PC.
• Saves the existing configuration file from the 1095A/C to your PC.
• Compatible with Win 98/NT/2000/XP

1095A/C Firmware Release Notes

How do I find my firmware revision?

Using Serial Commands:

1. Start a terminal program such as TeraTem (available for download on this page)
2. Configure for 9600, 8, N, 1
3. Press V
4. Press E
5. The terminal program should show the firmware revision date in the format dd mmm yyyy.

Using Model 1095A/C Utility Application software (1095utility_vxxxx.exe):

1. The xxxx refers to the version number of the 1095A/C Utility
2. Connect the 1095A/C to the computer
3. Run 1095utility_vxxxx.exe
4. Click the Version tab
5. If the data is blank then click Unit > Read

Contact Technical Support if your firmware is prior to 2008.

195A/C Firmware Release notes:

Firmware Revision	Comment
2010.02.24	version 24 Feb 2010 Bug 600: Visible satellites can show less than satellites tracked. Updated version of the display firmware (change brightness settings).
2010.01.05	version 05 Jan 2010 Bug 598: IRIG-B IEEE 1344 outputs incorrect year (00 instead of 10).
2009.09.01	Release 01 Sep 2009 Updated to work with new display processor
2009.07.28	Release 28 Jul 2009 Bug 573: Out-Of-Lock relay mirrors Fault relay. Bug 578: For test purposes, Parity dip switch setting On-On will be used for "Even" parity instead of "None" Fix serial port configuration latch to match version B (and on) boards. (will now not work correctly with version A boards).
2009.06.30	version 30 Jun 2009 Bug 544: Fix "DA" output to correctly show minus sign for deviation values between -0.01 and -0.99 Bug 546: Skip rate setting when configuring event broadcast Events referenced starts from 1 instead of 0 Event buffer size increased to 300 (was 250) Deviation calculation updated so that it won't be skipped when index pointer is 0. Remove display "Dim" and "Bright" commands (LE command) Enable "TS" command to display front panel time when unlocked (Marketing request)
2009.01.14	version 14 Jan 2009 Initial release