Firmware Updates

Requires an EPROM UPDATE: Contact Tech Support to request upgrade. For More Information, Click Here

1) Bug 613: Removed RS-232 setup options for Option 19. The 1088B Option 19 is the out-of-lock relay and has no RS-232 functions.

Requires an EPROM UPDATE: Contact Tech Support to request upgrade. For More Information, Click Here

1) Fix power-up set defaults: Incorrectly had to wait until "SETUP" key released.
2) Complete "Position Hold ID" (user or survey position flag)
3) Block user from changing user position or position hold setting while survey active.
4) Add 3D mode qualification for routine that calculates the survey position..

Requires an EPROM UPDATE: Contact Tech Support to request upgrade. For More Information, Click Here

1) Fix power-up set defaults: Incorrectly had to wait until "SETUP" key released.
2) Possible survey fix: "Zero" positions will now be ignored when doing survey calculation.
3) Complete "Position Hold ID" (user or survey position flag)
4) Block user from changing user position or position hold setting while survey active.
5) Broadcast format time moved from the 20ms mark to 100ms mark. It was moved to give Option-28 enough time to format broadcast messages. (Opt-28 broadcast data was being copied while it was still being update causing some "0x00" characters to randomly appear in the message)
6) DEBUG CODE: Output lat-long dif when debug_mode broadcast set to mode 2.

More Info/Download Firmware Here

1) Bug 597: IRIG-B IEEE 1344 Outputs Incorrect Year

More Info/Download Firmware Here

1) Bug 600: Visible satellites can show less than satellites tracked.
2) Updated version of the display firmware (change brightness settings).

More Info/Download Firmware Here

1) Add support for C37.118 CFG-2 messages to be sent via the UDP broadcast port.
2) Updated how the C37.118 auto UDP start-up functions. The broadcast will no longer be enabled all the time (it can be stopped via the C37.118 stop broadcast command).
3) Relays put into fault state when hardware fault detected.

More Info/Download Firmware Here

1) Bug 559: Change tabular results, display 0, function key 4 from "PH ABC" to "PH ABCN".
2) Bug 572: Inconsistencies in user interface
Change references to "Sag Swell" to "Power Quality"
3) Bug 591: Rename "DUR", in Sag-Swell setup, to Dwell
4) Bug 594: Auto log data loss (max log size seems to be around 1032 records - should be able to store upwards of 16,000 records)
5) Bug 595: View auto log
Fixed problem of paging up (using increment of more than 1) from the bottom of the log.
(Depending on the increment size, the only record showing might be the one in the edit box)
6) Bug 601: Custom input screen allowed illegal settings

Requires an EPROM UPDATE: Contact Tech Support to request upgrade. For More Information, Click Here

1) Bug 599: Problems erasing single log file
2) Update RS232 output to replace Null (0x00) bytes with space (0x20)

More Info/Download Firmware Here

Host Version 1.10 24Feb2010:
1) Limit Flicker values to two decimal digits of resolution (match 933 and 1133)
2) Fix potential log data download data corruption problem.
3) Bug 511: Overflow in certain values of Power Quality Config
4) Set default date to 1 Jan 2010, was 6 Jan 2005 (only used when powered for the first time).

DSP Version 1.04 24Feb2010:
1) Bug 535: Harmonic Phase Angles fixed at 90, 180, etc.

Require an EPROM UPDATE: Contact Tech Support to request upgrade. For More Information, Click Here

10 Apr 2007 Replaced latitude, longitude and altitude receiver functions with php() position function