Discontinued Products

NOTE: The following products have been discontinued and are no longer supported by Arbiter Systems^®, Inc. The information and links listed below provide all available documentation on these products.

Model 911A Phase Angle Meter

The Arbiter Systems^®, Inc. Model 911A Phase Angle Meter is a compact, hand-held unit capable of voltage to current phase angle measurements with 1 degree accuracy. An optional adapter allows voltage to voltage phase angle measurements with the same precision. The instrument's operating characteristics are optimized for use in the maintenance of utility transmission and distribution systems, and commercial/industrial load management.

Model 918B Phase Angle Multimeter

The Arbiter Systems^®, Inc. Model 918B Phase Angle Multimeter is a compact, microprocessor-controlled instrument capable of ten functions which have been optimized for use in applications involving AC power transmission and distribution. The Model 918B measures DC Volts, AC rms Volts, AC rms Amperes, Frequency, and Phase Angle directly. The 918B calculates Watts, Volt-Amps, Volt-Amps Reactive, Power Factor and Watt Hours based on the measured values.

Model 1062A Environment Monitor

The Arbiter Systems^®, Inc. 1062A Environment Monitor will ensure that your ATE system's operating environment is properly controlled. The 1062A continuously monitors temperature, humidity, barometric pressure, line voltage, and line frequency. Up to 12 independent sensors plus the optional barometric pressure sensor can be connected to the 1062A. The sensors can be placed hundreds, even thousands, of feet away from the 1062A. The 1062A's compact half rack size, 3.5 inches high and 8.25 inches wide, makes it easy to rack mount directly into your ATE system rack thus freeing up table top and bench space.

Model 1096A Dual Type IV Power Meter

The Arbiter Systems^®, Inc. Model 1096A Dual Type IV Power Meter is a standards-lab quality instrument based on a design of the USA National Institute of Standards and Technology (NIST). The Model 1096A is used with thermistor power sensors and an external digital voltmeter to make RF power measurements of the highest accuracy. Compare the unbeatable combination of system-oriented features along with a price well below older products, and you'll see why metrologists everywhere are making the Model 1096A Dual Type IV Power Meter the standard in precision RF and microwave power measurement.

Discontinued Accessories:

AP0009800 - 100:1 Clamp-on CT, 100 Amp
HD0031800 - Transit Case
HD0065200 - Soft Carrying Case

 

 

 

Contact Technical Support for further information regarding these products